1 / 9
Tesla Wall Connector Gen 3 Spacer for Cable Channel 30X15mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For aesthetic installation.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
To avoid transitions/turns/steps, which are often complicated and end up looking ugly. I offer a very simple and nice (will never be visible ;) ) spacer for installing Tesla Wall Connector Gen 3 using a cable channel measuring 30x15 millimeters, which perfectly fits 5 wires with a cross-section of six square millimeters, which is more than enough for safe and reliable use of Tesla Wall Connector Gen 3 in rooms where an industrial look is unacceptable. P.S. the last two photos show a mismatch in the plane.