Honda Rebel cmx500 Scrambler SCL500 Speedometer Surround
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Surround for digital speedometer, makes easier to see display in bright sunlight. Adds Style.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 146
- Wydruki
- 2
- Wyświetlenia
- 1209
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A surround for the Speedometer/display unit.
Note:
This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models) although believe it will also fit earlier single front button display cluster.
Designed to fit display cluster with outside diameter of 104mm tapering to ~106.5 mm.
Enhances style and makes easier to read digital speed display.
Test printed in PLA and fitted to a bike. No supports required.
Easy quick print and fit.
Should also be fine/even better in PETG,
Probably add brim and/or rafts if printing in ASA.
Standard version for SCL500 scrambler models and requires one M3 Hex 20 mm bolt, a Nut and ideally a couple of Washers to secure. A small zip tie may suffice but recommend using a bolt.
This version will be OK for Rebel/CMX too. The SCL/CL bikes have a cage around the display cluster. The surround is split to allow fitting on the SCL without removing parts from the bike. Surround will flex enough to navigate around cage during fitting.
Fitting on Rebel/CMX should be simple as there is no cage around the Speedometer.
It should not be impossible to fit the alternative clip version on SCL500 but would require removal of speedometer. Not recommended.