1 / 4
Adhesive mounts for the Atem Power Solar charger 20A
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These allow a well ventilated adhesive mount right to the battery case.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
These are identical so you'll want to print 2. I used PLA, only because that was already in the printer. 3M VHB tape on the mounting surface and 4 M3 thermal nut inserts and you are ready to go!