1 / 2
Cup holder for crutch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cup holder that snaps on 22mm diameter crutches. I use it with an Emsa thermo cup as seen on the picture.It…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cup holder that snaps on 22mm diameter crutches. I use it with an Emsa thermo cup as seen on the picture. It is 70mm high, the bottom has an inner diameter of 70mm and the top has an inner diameter of 80mm. This was a quick design that I did not refine since it just worked for me. Add a bit of rough tape to your crutch to avoid it sliding down.
Print Settings
Printer Brand:
Anet
Printer:
A8
Doesn't Matter
Supports:
Yes
0.2mm
Infill:
20%
Category: Household