Belt Clip for forearm crutch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I need two forearm crutches but wanted to be able to have a hand free without having to hold both crutches in one…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I need two forearm crutches but wanted to be able to have a hand free without having to hold both crutches in one hand. So I created this belt clip that I wear permanently on my belt for a few months now. I created a second version that I thought might be a bit stronger, but I haven't tested it yet.
It fits on a 40mm wide and 4mm thick belt. You can "easily" snap in crutches with a diameter of 22mm. In the beginning the fit might be quite tight and you need some force to attach/remove the crutch - try not to slap people during removal ;) - but after some time it gets easier.
I included the Fusion 360 file so you can adapt it to your needs. I am not great with Fusion so things might get a little messy if you change the parameters :D If you cannot edit it yourself feel free to ask for a version matching your parameters.
Print Settings
Printer Brand:
Anet
Printer:
A8
Doesn't Matter
Supports:
Yes
0.2
Infill:
20%
Notes:
Print it standing up with supports on the build plate. I used PLA and have been using it for a few months now without any problem other than a very slight decrease in strength.
Make sure to use enough perimeters/infill that the front part (2.1mm thickness) is solid.
Category: Accessories