Cricut Stabilo Sensor 0.3mm Pen Adaptor for Cricut Maker 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cricut Maker 3 Pen adaptor for Stabilo Sensor 0.3mm Fineliner pens. Same outer dimensions and shape as original adaptor
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 499
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Cricut Maker 3 Pen adaptor for Stabilo Sensor 0.3mm Fineliner pens. Modelled from scratch. Same outer dimensions and shape as original adaptor but narrower inner diameter to ensure the pen is held without any wobble. Pen tip to work surface is +/- 1mm to the gap on regular Cricut pens.
Printed in PETG. 0.2mm layer heights with 4 walls and 50% infill. Bumped my X1C printer up to 260c to ensure the tabs don't snap when clamping the adaptor to the pen.
Would probably grab the pen better with matt PLA+ filaments (PETG is a bit slippery) as long as there is some give in the print and good inter-layer bonding (up the temps a bit).
Will post more adaptors as new pens come my way.