Medicine Cabinet Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement or additional shelf for your medicine cabinet
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
A replacement or additional shelf for your medicine cabinet. I have a few different versions. Version 2 comes as either a single piece or two pieces you slide together. If you print the two-piece variant, it's a tight fit sliding the parts together. I would recommend using a rubber mallet to gently tap the two pieces. The pictures in my medicine cabinet are the two-piece variant. As you can see, they've held up just fine. I've had them there for four years with no problems. If you have a larger print bed, you can try the single piece versions. Either PLA or PETG should work fine. Printed with 1mm perimeters (top, bottom, sides) with a 10% infill. No supports needed.