Parametrizable Toy Tractor Steering Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this for a Rolly Toys toy tractor, but easily customizable to others too
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original steering wheel on our Rolly Toys tractor broke, so I designed a replacement. The model is using OpenSCAD for customizability and all major parameters can be adjusted easily, with the model changing accordingly. Should also work for other toy tractors/cars, often only with few parameter changes.
There's a triangular cut-out (which can be switched off/removed) that allows snapping in the Mercedes star from https://www.printables.com/model/1033113-replacement-mercedes-star-for-rolly-toys-farmtrac
Model also available here on github: https://github.com/skohlbr/openscad_models/blob/master/tractor_steering_wheel/steering_wheel.scad
Print parameters:
- Recommend a larger number of perimeters ( >3 ), then it will be quite sturdy, even when using PLA (as I did).
- Used 30% 3D honeycomb infill
- Added paint-on support for the overhanging middle-section