Sunlu S8 Skirting and Lower Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A skirting and Lower Enclosure mod for the Sunlu S8 and a 7" Klipper Screen.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was inspired by Big Dog 3D Creations' skirting for the Ender 5 Plus and decided to remix it to fit the Sunlu S8. This required me to take measurements from his provided .stl files and remodel them in SolidWorks.
I have provided all my .step files as well as a .step file of the entire printer.
No supports required
The hardware is all M4x8. Some M3x8 and M3x10 for the LCD mount.
Please visit Big Dog 3D Creations' page for assembly instructions or utilize the .step file of the printer I provided to see how everything goes together.
For the Electronics Panels, print a mirrored copy of the side panels for left and right.
The power supply, motherboard, and mini-DIN Rail were mounted using VHB tape.
I used a BTT Manta M8P and it's mounts can be found here.
The Mini-DIN rail can be found here.
The 7" touch screen I used can be found here. I also had to use 180* adapters for the HDMI and USB. They can be found here and here. Get the UP version of the USB adapter.
I also added a USB plug to the front right skirt. You can also put it on the front right. It is interchangeable. The USB extension can be found here.
If you are not going to add a 7" Klipper Screen, just use the rear skirting on the front as well.