SV08 Enclosure Door Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I did not like the magnetic latch for the enclosure so I designed this pivoting latch
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 602
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After finding and slightly modifying these hinges: https://www.printables.com/model/1023897-sovol-sv08-diy-door-hinges
I made new doors. Previously, I used the magnetic latch but found my magnets were too weak and the doors would pop open during prints. I designed this door knob and latch system to keep the door closed. I also think it is more aesthetically pleasing.
I have included the knobs, latch, and a jig to help drill the holes for the knobs.
The door knobs are attached with m3x10 bolts. I did not use threaded inserts.
Printed using PETG (ignore the pla spool in the photo). Modeled in Inventor. IPTs included if you feel the need to remix.