GNK-200 Dettlaff Compatibility Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed GNK-200 parts to create space and mounting for a Kelly Industries Dettlaff board.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the GNK-200 (specifically manatee edition) designed to use a Kelly industries Dettlaff board. This board provides significantly more customization options than the original firmware. Main changes include holes for heated inserts on the left side of the cage and extra space inside the shell to allow it to slide past the board.
The end cap is an optional replacement, but it has been updated to be much more symmetrical than the original and fit the lines of the shell better.
Due to using the Dettlaff board instead of the original gnk electronics, the following hardware changes are made:
Add:
3x M3 6mm button head screws
3x M3 4mm heat set inserts
1x Dettlaff Brushless Blaster Controller
Remove:
1x Arduino Nano
1x Buck converrter/BEC
1x MOSFET board or kit
Other than these things, the hardware and electronics are the same as the manatee version.
All parts have been pre oriented for printing.