Headphone Stand The Finals Sponsors / OSPUZE / HOLTOW / ISEULT / DISSUN / ENGIMO / VOLPE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Small Collection of Headphone Stands in the Finals Sponsor Style
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 398
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
https://www.thefinals.wiki/wiki/Sponsors
https://creativecommons.org/licenses/by-sa/4.0/
Design belongs to:
THE FINALS © 2022-2024 Embark Studios AB. THE FINALS and EMBARK trademarks and logos are trademarks or registered trademarks of Embark Studios AB. NEXON trademark and logo are trademarks or registered trademarks of NXC Corporation. © 2024 Valve Corporation. Steam and the Steam logo are trademarks and/or registered trademarks of Valve Corporation in the U.S. and/or other countries. © 2024 Epic Games, Inc. All rights reserved. Unreal, Unreal Engine and their respective logos are trademarks or registered trademarks of Epic Games, Inc. in the U.S. Patent and Trademark Office and elsewhere. All other trademarks and trade names are the property of their respective owners.
Recommended Print Settings:
0.2mm Layer height
25% Infill
3 Wall loops
Multi Colour via MMU Prusa or via Bambulab AMS System recommended.
The Layers are named by there feature like this example of the Volpe Logo from a different upload of mine:

For the Top to Stem Connection i Recommend Superglue.
For the Stem to Base Connection i made a 4.8mm hole in the Stem, that is for an M3 Heated Insert. But you can Use aswell Superglue if you want.
For the Screw you need am M3x8mm.

If you like the Design Leave a Comment and a Make.
Thanks, See you in the Arena.