Adjustable slave wheel for SMARS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Many people had problems with the tracks length. they were too tight or too large. with this mod you can adjust the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Many people had problems with the tracks length. they were too tight or too large. with this mod you can adjust the distance between the wheels. This mod is made for Chassis_S Mk2 but should also be compatible with the Mk1 (the only problem is to lock the nut). To use it you will need an M3 screw and a self locking M3 nut. I didn't tested it yet so let me know! IMPORTANT print the adjustable SW piece with one of the two flat faces on the plate and not the part that should touch the chassis ( we need to keep it elastic to enter in the wheel without break it)
Category: Robotics