Beltless motorized camera slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This slider is designed to have all the control electronics in the carriage. This allows you to make it as long as you…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This slider is designed to have all the control electronics in the carriage. This allows you to make it as long as you want simply by stretching the tracks. It can be controlled via bluetooth from a smartphone or can be programmed to follow a certain movement. It also has ribaltabile stands, so if you mount it on a tripod, the stands are hidden. https://youtu.be/PIq2OaEJkaU
To build it, you will need extra material: -2 ⌀8mm steel bars (as long as you want) -1 15x15mm aluminium square bar (long as the steel ones) -8 M3 15mm screws -8 M3 self-blocking nuts -6 M4 20mm screws -2 M4 self-blocking nuts -4 M4 nuts -4 ⌀8mm linear bearings -3 bearings -1 28byj-48 stepper motor -1 arduino nano -1 HC-06 bluetooth module -1 Lebez 359-B -1 7.4V 1200mAh battery -4 vaporizer rubber bands
- ⌀12x40mm spring
- some wires
Category: Camera