Trijicon Credeo 1-8 LVPO Anti Reflection Device
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2 piece easy to print and assemble kill flash
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used a kill flash design found here:
https://www.thingiverse.com/thing:4875497/apps
I created a ring that allows the user to snap it over the Credo 1-8 LVPO. My ring sets the grid back from the face a few millimeters to help protect the honeycomb grid. It also has a slightly smaller ‘friction ring’ designed into it so it holds tight to the end of the scope body.
This was designed to be easy to print. I used a 0.2mm nozzle so I could print 0.18mm walls. The honeycomb grid is just a single wall. You could use a 0.4mm nozzle but you may have to change the scaling to get everything to work.
Printed with a Creality Ender3 V3 SE and Creality HP PLA+.
The STL contains both files. Print as oriented. Press the grid into the ring, secure with a small amount of superglue or B-7000.