1 / 2
Shadows of Brimstone Enemy Faction Clip — zdjęcie 1
1 / 2

Shadows of Brimstone Enemy Faction Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A clip for attaching enemy faction cards to stat sheets.

Ocena
0 / 5
Polubienia
9
Pobrania
49
Wydruki
0
Wyświetlenia
442
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Public Domain

This is a super simple model that goes really well with my vertical Shadows of Brimstone Enemy Sheet holders. This keeps all those faction, tribe, trait, and other similar cards connected to their respective Enemy Sheet, making it much easier to see and remember all the game mechanics in play for that Enemy.

This was inspired by episode 5 of the Grit Podcast, a Shadows of Brimstone podcast.

Print Settings

I printed mine with a 0.6 nozzle and 0.35mm layers for a very speedy print and a 3mm brim for stability, in the same orientation you see here.  That was to avoid supports and to put the layers perpendicular to the cards, making a snag less likely to occur. 

Using a 0.4 nozzle may require some adjustments to your perimeter settings.  I recommend a test print or two before you commit to a batch of clips.

Model Files

The gap is 0.6mm.  For me, it works really well with both sleeved and non-sleeved cards.  It holds with just enough grip without damaging the cards. However, printers, tolerances, and card sleeve thicknesses vary, so I added some alternatives. (I'm kind of obsessed about not damaging cards)

  • FactionClip - 0.6 mm gap for cards
  • FactionClip_0.7 - Slightly bigger gap for cards
  • FactionClip_0.5 - Slightly smaller gap for cards

 

 

 

Tagi