GIL X & Y BELT TENSIONERS - ENDER 3 PRO (2020 / 4040 Rails)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tensioners for Ender 3 Pro offer precise belt control with a minimal design
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 207
- Wydruki
- 2
- Wyświetlenia
- 1051
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tensioners for Ender 3 Pro – Precision Made Simple
Introducing the GIL tensioner, designed specifically for the Ender 3 Pro with 2020 X rail and 4040 Y rail. Precision is at the heart of this design, with tolerances dialed in to a tight 0.15mm to 0.2mm. For those requiring a bit more flexibility, a version with larger tolerances is in the works. To ensure the best performance, it’s recommended to print the pulleys horizontally, preventing layer separation over time. And remember, dry fit all screws first to guarantee everything works as intended before final assembly.
X Tensioner
This minimal design strikes a balance between simplicity and structural rigidity. The recessed M4 bolt allows you to fine-tune the belt tension to 110hz, keeping adjustments stable over time. The 1mm gill lines on the side offer a clear reference point, allowing you to maintain your preferred tension easily. Start by placing the pulley and belt into the puller, then insert and secure the tabs. Attach the tensioner to the X rail, either using a T-Nut for extra security or fastening directly. As always, be mindful when tightening the screws to avoid any interference with the belt or idler pulley.
As an added bonus, the X tensioner features a modular connection point at the end, allowing you to easily design and attach custom accessories—whether it's a camera mount, a mini tool tray (included), or anything else you can think of. This gives you extra flexibility and utility beyond just belt tensioning.
Y Tensioner
The Y tensioner follows a similar design principle, but with added control for enhanced precision. It uses two M4 bolts, allowing you to center the belt perfectly and minimize friction during operation. This dual-bolt setup offers complete control over belt alignment, ensuring smoother, more consistent movement.
