1 / 3
Asus-VG27AQ1A Power Supply Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A table mount for the power brick of a Asus-VG27AQ1A monitor. Big brick (7.5x7.5cm) and smaller (6.5x6.5cm) files.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Files:
- v3 is for bricks that are 7.5cm x 7.5 cm and older. It has only one lip, because I'm to lazy to backport the second lip to the old version.
- v4 is for bricks that are 6.5cm x 6.5 cm and newer. It has two lips. The fit is a bit tight, maybe print it 102%.
Print:
- PETG / PLA+. Use a filament that is a bit more heat resistant because this bricks can run hot.
- Infill irrelevant, solid layers in this side.
- I've printed it in 0.3mm with a 0.6 nozzle
Mounting:
- I've used wood screws M4x50, maybe M4x40 will work, but they are short.
- The tubes are only guides for the screws, the screws are not tapping the tubes