Hairdryer Wallmount - BaByliss
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suitable for all hair dryers with a diameter of 84 mm
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 397
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This wall mount was designed for a BaByliss hair dryer with a tapered diameter of approximately 88 mm (top) to 84 mm (bottom). Other hair dryers may also fit, but it’s recommended to measure beforehand. If necessary, the mount size can be easily adjusted by scaling it in the slicer.
The four mounting holes are countersunk and designed for 3.5 mm wood screws with a minimum length of 16 mm. I recommend using SPAX universal screws (3.5 x 16 mm), available here.
I printed the mount with three perimeters, a 0.20 mm layer height, and standard support structures. Initially, I used PLA, but if this doesn’t hold up in the long term, I’ll reprint it in PETG or ASA for added heat resistance.
Purpose:
I designed this mount so that I no longer have to leave the hair dryer on the sink, where it often falls, especially when still warm. With this mount, the hair dryer stays securely on the wall—always within reach and safely stored.
________________________________________________________________________________________________________________
I would greatly appreciate a like and a rating. If you have any suggestions for improvement or requests for changes, feel free to let me know.