Filament Spool Holder - Roller Style - NEW V2 - Easy to Print and Assemble
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No Tools* - No Glue - Just 4 (608 skate) Bearings
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 179
- Wydruki
- 1
- Wyświetlenia
- 557
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The easiest and most convenient filament spool holder / roller you'll ever print and build.
BOM:
4 - 608 (skate) Bearings (do not need to be sealed bearings)
PLA Filament
(optional but recommended) - 4 Non-slip rubber or silicone pads/feet
Printed Parts Needed:
1 - Base
2 - Rollers
8 - Hub (halves)
Assembly Instructions:
→ Designed to press fit together tightly, no glue required.
→ *Weighted tool may be helpful to seat the hubs into the bearings
Press two hub halves into a bearing, be sure to seat the hub and bearing completely.
Press the hub/bearing assembly into a roller end.
Repeat for other 3 bearing/hub assemblies.
(optional) - Add four non-slip rubber/silicone pads to the bottom corners of the base.
Drop the roller/hub(s)/bearing(s) assembly into the appropriate receiver slots in the base.
Celebrate your creation!
Printing Tips:
General - 3 walls - 3 bottom layers - 4 top layers - 20% infill (preference is cubic).
Rollers (for best surface finish and fit) - Scarf Joint Seam, Outer - Wall Order, Inner/Outer/Inner.
Hubs and Rollers - Print on a smooth build surface for best results.
Parts (STL's) are in the correct printing orientation.
Notes:
Base will NOT fit on a printer that has a build volume less than 200mm. Won't fit on a A1-Mini for example.
Like this build? Buy me a coffee or beer with your tip using the button above or links below.
Thanks :)
https://paypal.me/cdsmakestuff
or
https://www.venmo.com/u/cdsmakestuff