Racing spaceship with detachable engines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a racing spaceship with engines that can be slotted in and out.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Public Domain
This is a model of a racing spaceship that I designed in Tinkercad. The engines are detachable and slot into a holder that slots into the main section of the model
Parts can be split up to print one at a time or be printed all at once (make sure bed adhesion is good before trying to print all the parts at once because if one fails it will most likely knock the other pieces down)
A brim is recommended to prevent the model from falling over during printing.
The correct printing orientation is with the front of the spaceship facing down.