TARDIS Storage Box - BASIC (no power/electronic interaction)

Foot tall storage and display TARDIS, passionately crafted over 2 years.

Finally released as I have finished design and kitting of the ‘Electronics and Extras Kit' for the Power version (battery powered and interactive with pulsing lights, audio clips, concealed touch trigger, ‘Lamp Mode’ when plugged in, and more).

Power TARDIS version is available in my Etsy store (until I sell a few Basic models here and can list it here)

This BASIC version is for those who do not want lighting, interaction or power of any kind. A Basic Extras kit is available on Etsy:

• Sharp top signs (1 spare)
• Door call box and ambulance signs (adhesive backed, 2 spares each)
• 2 top globe versions
• Door hardware: door handle, sign handle, lock
• Gel feet
• 8 magnets for retaining lid

Printable Signs sheet is included with file downloads

TALLEST model is the Big Blue box file itself, at 249.5mm. If you have a 250mm height AND have modified, such as volcano nozzle or glass bed, you may need to undo modifications to fit. Otherwise, just tighten down the bed a bit and re-level.

All print files are in ZIP archive. I also uploaded the Big Blue Box file and some others separately so you can examine them before purchasing.

Also browse this Basic TARDIS Assembly Guide before purchase if you please.

Designed in CAD and optimized for:

• Maximum printability
• Safest printing and minimal supports
• Error free model files
• Proper orientation when opening file
• Light friction fit clearances when filament flow rate has been calibrated and used in slicer
• Dual file options where appropriate (bottom box insert, top light globes and window panels)
• Box Test Section print model for dialing in speed/print settings and test fitting several mating parts

Comprehensive model print settings guide included publicly so you can read before purchase. Also included with file downloads.

Single model in each STL when multiples are necessary. This allows you to easily print just 1 and dial in settings if necessary, minimizing waste before printing the rest.

PLEASE send a message with your questions. I care and desire to make this a neat experience for other printers / makers.

The jaw dropping / stunning / excitement-creating POWER version has: 

• Channels for concealed wiring
•  Accommodates low profile lighting (8mm wide 5v COB light strips), while maintaining the same storage volume
• Wireless connection capability to top light
• Hole for USB port in back. 
• Adapter plug CAD files to create your preferred connections for power port and shelf to lid wireless connection

My ‘Electronics and Extras kit’ available on Etsy and Tindie (for POWER version of TARDIS) includes everything but batteries to bring the POWER TARDIS version to life with:

• Preprogrammed and tested, SMD assembled custom circuit board and through hole assembly parts. designed for ultra low standby power consumption (15uA).
• Speaker, audio module, and microSD card pre-loaded with 37 sound-leveled show clips 
• Cordless operation and ample power delivery for play cycles. 
• Lid trigger, concealed touch sensor, and “Lamp Mode” when plugged in
• Function tested and firmware preloaded via custom PCB test fixture.
• Keyed connectors, capacitors and male/female headers to complete the circuit board assembly
• Audio module with microSD card and pre-loaded sound-leveled audio clips from the series
• Light strips precut to proper lengths and tested
• Blue and white diffused LEDs for top light, so you can choose which Doctor's TARDIS you prefer
• Trimming potentiometer to dial in preferred audio level
• Prepinned 22 and 24 AWG wiring and connector housings for circuit board connections
• 3xAA AND 2x18650 Li-on battery holders. AAs are everywhere, but the pricier 18650s in parallel offer better and longer performance
• USB C power port with housing and model file to fit
• 4-pin magnetic connectors  and print adapters for wireless connection to top light
• Wiring connector labels to easily match connections to circuit board
• Heat shrink to reduce chances of potential shorting of wired connections
• Carefully crafted and visually sharp Police Public Call Box top signs for backlighting
• Door call box and ambulance stickers
• Door hardware so you don't need additional silver filament- larger handle, smaller handle and lock
• 2 top light globes so you don't have to dial in high resolution small feature printing. Choose which Doctor's TARDIS globe you prefer
• Non-slip Gel feet to elevate box for good sound production and eliminate plasticky feel and sliding on resting place
• Magnetic connector pair for wireless power to lid for top light and play cycle triggering
• Magnets for pleasant lid retaining feel opposite from magnetic electronic connectors
• Quality 3 watt 8 ohm speaker in housing
• Adhesive mounting strips for battery holder and speaker
• Comprehensive, step-by-step wiring / assembly instructions with pictures

If you have even a simple solder kit, helping hands and basic experience, you really should look at the Power version and companion electronics kit for the ultimate maker Who fan creation.