Simple lighting solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for a simple lighting solution to monitor and time-lapse prints and this is the result.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I was looking for a simple lighting solution to monitor and time-lapse prints and this is the result. It's only been on my printer for half a 20+ hour print but seems to be working well. The light listed below is motion/heat activated so it turns on when the lighting is low and a print is running (or it detects you) but turns off when not needed.
All all holes are sized for M3 screws.
These are the lights I used:
https://smile.amazon.com/gp/product/B06Y248YVJ/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1
Hope you find it useful.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Notes:
3 perimeters to add some strength.