1 / 2
BMW 320I TOURING 2003 cup holder for center console
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BMW 320I touring (2003) cup holder to fit in the original console
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
As my BMW 320I touring (2003) was missing cup holder in the middle console I designed a replacement part which can fit on the original console. The original middle console can be easily removed using either a thin screw driver (or similar tool) or just by wiggle it from side to side as it is fastened with clips.
Printing tips
- As the top parts is quite thin, some additional adhesion to the build plate might be needed to avoid warping.
- As the clips can break, I added spare clips where a thin steel wire can be inserted between in order to give some additional strength and flexibility. Then glue the parts together or use a pause print command.
- Printed in black PETG