tesla valve modulable unit to stack to other
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi everybody, just a point about the tesla valve, I made a standard one but one of the funny thing is that it is…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi everybody, just a point about the tesla valve, I made a standard one but one of the funny thing is that it is difficult to studyhow many loops / unit of Tesla pattern you need to have an efficient valve effect-with this you can print how many valves you want and then try to see the effect of adding more units-
I did a similar thing in the past with a tesla model with basically holes sideways to allow to block holes like on a whistle.this will allow too to see the effect of each added pattern
instead of designing several valve model of different length!
Category: Engineering