40mm Gas Mask Inlet Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NATO 40mm covers, both vented and closed. Untested. Updated: Edited the model to print without supports face-up.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 806
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Inlet logos and covers for gas masks. Untested.
Print rings with threads pointing up. Print covers with open side up, “face” down. Shouldn't need supports in general, but I haven't tested the thicker logos yet. Those might need some supports for the first 2-3 layers.
Updated: Edited to print face-up without supports. Also rotated the rings to match the print orientation without supports.
NOTE: There is a minor airway restriction. I need to fix this to allow for more airflow. Usable as-is, just be informed.
General disclaimer: Use at your own risk.