1 / 2
Isshin ryu kusarigama chain weight part kitcard PLA or flexible PLA or TPU v3 — zdjęcie 1
1 / 2

Isshin ryu kusarigama chain weight part kitcard PLA or flexible PLA or TPU v3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hi everybody, here my first trial of a kit card to be printed and to assemble together with clip and tenons design in…

Ocena
0 / 5
Polubienia
12
Pobrania
38
Wydruki
0
Wyświetlenia
926
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

Hi everybody,

here my first trial of a kit card to be printed and to assemble together with clip and tenons design in order to built click and fix altogether.

Joined a picture of the final assembly.

to be printed in PLA or flexible filament.

ASSEMBLY:

1)Slide side part into the main part

2)Then insert the joint in the middle part
from below upwards above the clip
position.

3)Then insert from above each add parts
Until it clicks
4)Add super glue at the interfaces between
The joints and the other parts. This will increase
Resistance of the structure in case of impact

Best Regards

T.C.

Category: Sport & Outdoors

Tagi