D20 Vertical (2in x 3.5in) Business Card Holder Print In Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A d20 shaped business card holder for business cards 2x3.5" (portrait)
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 2
- Wyświetlenia
- 196
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
This is a simple business card holder. It's 2.72" (82.55mm) high (X) 2.8" (73mm) wide (Y) and 2.7" (69mm) thick (Z) in full with a stand on the bottom and holder with tabbed ends on each side.
I made it for some vertical business cards I had printed, new cards, new holder. My business cards are 3.5" high and 2" wide. This fits about 20-30 business cards comfortably.
The actual size of the space for cards is 69mm (2.7") wide to give a lot of extra space (tolerance) for cards and 23mm (0.90in) wide to fit a good deal of cards. The tabbed ends help people remove the cards.
I offer this for free, but feel free to buy me a coffee
It's lightweight and easily printed with just a brim and no supports, printed in place.