Matrix Peg for Transformers SS86 Bumblebee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With SS86 Bumblebee spotting enough space in his chest for a matrix, here's a quick adaptor peg to achieve just that!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 806
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
With the new SS86 Bumblebee spotting enough space in his chest for a matrix, we just had to do a quick adaptor peg to achieve just that!
This peg fits snuggly into the rectangular notch in the middle of Bumblebee's chest cavity.
This peg may be a little tricky to fit it into place, so either do it slowly by hand or the use of a pair of tweezers or pilers might help too.
So with this peg, you can fit in a couple of matrixes, ranging from the classic one from Earthrise Optimus Prime to the one from Target Optimus Prime (which should be similar to Laser Prime) to the one from WFC Gamer Edition Optimus Prime!
And of course, once empowered by the matrix in him, outfit him a powered up battle trailer from earlier (https://www.patreon.com/posts/60969449) !
===
So there we have it - a little fun addon to let you power up your own SS86 Bumblebees too. Happy 3d printing this one! =)
===
This model is not to be uploaded or sold in any form and is intended for personal use only.
Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)
Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog