Cacencan Microphone Boom Cable Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seriously, what were the originals made out of!?
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 81
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple replacement for the cheap plastic clips that came with my Cacencan low profile microphone boom since they're apparently made from powdered sugar and disintegrated on me. I used my last original one to quickly draw one up and print 'em out.
Nearly a 1:1 replacement, just with a little more room in the middle and a smidge longer. Works like a charm printed in PETG-CF, but probably fine in other materials as well.
If you have a clean build plate these should print fine without a brim. If you're printing on a smooth / glass plate, or regularly have build plate adhesion issues, you might want to use a brim. Otherwise the standard 0.4mm line width and 0.2mm height work great.
There's a tuned profile over on MakerWorld if you'd like it.