1 / 4
Dodecahedron (assembly of Pentagons) for 3D scanner markers (fully parametric) — zdjęcie 1
1 / 4

Dodecahedron (assembly of Pentagons) for 3D scanner markers (fully parametric)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This dodecahedron can be used to stick reflective markers for 3D scanners to it. It's fully parametric (Autodesk Fusion)

Ocena
0 / 5
Polubienia
53
Pobrania
890
Wydruki
0
Wyświetlenia
2377
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This dodecahedron can be used to stick reflective markers for 3D scanners to it.
It's fully parametric when you use Autodesk Fusion.

This was built with a free version of Autodesk Fusion hence the license that doesn't allow commercial use and any derivates/remixes need to be under the same license.

If you haven't used it before in Fusion just hit “s” (for search) and then type “parameter”. This will give you a screen where you can adjust three values that affect the size of the dodecahedron as well as the diameter and depth of the circles where the sickers can be placed into.

Download the f3d file and adjust to your need. The 3mf is only an example for reference but it can be used for 10 mm stickers (10.5 mm circle diameter).

For printing:
This is a really easy print. Any filament (best would be a matte black), any printer, and infill and any top/bottom layer and perimeter amount should work.

Tagi