diabolo mount part to add later functionnality
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi everyone, here a mount to be printed along with my diabolo design (or not). You need to make sure that the size of…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi everyone,
here a mount to be printed along with my diabolo design (or not).
You need to make sure that the size of the internal rim is the same as your diabolo.
You may want to fix it with your diabolo.
You need two rims and 8 small boxes.
at the moment the small boxes are open.
you can mount anything here you may design.
But then this is a remix.
if you use the same design with the plug then please use the same licensing as mine.
However, if you use the box to put a box inside.
then feel free to license as you want.(at list CC-A)
For the small boxes I want to insert a whistle system. sothat when the diabolo rotate it will generate sound.
I thought also about integrating small LED system to make it emit light.
Please feel free to implement.
Regards
Froggy
Category: DIY