1 / 1
Bolt-on E-Bike Pedal Assist Sensor Wheel for Tapered Square
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Currently un-tested. Uses 5mmx2mm magnets and M3x10 SHCS threaded into plastic.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Make sure you divide the two halves before printing. They're split down the middle, but I left them touching for easy modification in the slicer to fine tune the fit with primitives.