Muscle Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A recreation of a foam roller
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
To print the outer part use TPU 92-95A I would use specific settings, including: increasing the wipe by a lot (12mm), constant speed for everything at 20-30mm/s, and as fast travel speed as the printer can.
I would also use a 10% cubic infill depending on how firm you want your roller to be, 2 perimeter walls, and 3 top and bottom shell layers. And I would suggest putting Ensure Vertical Thickness to Critical Only.
I would recommend a bigger nozzle (0.6-0.8), as there was still a little dropping on some of the overhang with the 0.4 nozzle, but not enough to affect the print.
For the inner part I would use PLA or PETG, using 3/4 perimeter walls, and 25% 3D honeycomb infill.
And of course especially made for NO SUPPORTS needed
Best of luck with the print!