Fujica ST705 Rewind Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for FUJICA ST-705 film camera. Button to unlock sprockets to rewind the film.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Apparently this button is not attached to the camera in any way and will just fall out of the camera when you remove the bottom plate.
I recently got this film camera. It had a number of small issues, including this button being missing.
I quickly 3d modeled a replacement, I never saw the original part, but this works.
It will fit loosely in the hole of the bottom plate. but it is not rattling once the bottom plate is re-installed on the camera.
It does not poke out of the camera even when not depressed.
I suggest printing this in a durable plastic like ABS. I used eSun ABS+. Sliced at 0.1mm layer height. Print with a brim as the surface area of the first layer is very very small.