QuickClick adapter for Ryobi Trim Router
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for connecting a Cen-tec Quick-Click hose on a Ryobi R18RTR Trim Router
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 285
- Wydruki
- 1
- Wyświetlenia
- 1520
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Adapter for connecting a Cen-tec Quick-Click dust extraction hose to your Ryobi R18RTR Trim Router.
Prints well standing on the hose connector. Support inside the connector and some details on the top. The print need to be strong, 4 perimeters will make it almost completely solid. It might be fine printed with PLA, but will benefit from a stronger material like PC-Blend.
I tried several designs to mount it on the router, but this version turned out to work the best. There are no clips that breaks, but it needs a MC6S M8x30 bolt to mount it to the router. Depending on your printer accuracy, you might need to sand the peg for the other hole and drill out the bolt hole.
Line up the peg on the left hole and then screw in the bolt on the right side.