1 / 1
Fungineers battery box inner gasket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inner battery gasket for fungineers battery box
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This will fit a fungineer battery box that included the 20s2p battery bought together. When I opened my battery box to check the BMS screws and loctite them I noticed the BMS was dusty after only 80 miles of riding. The provided red gasket is very thin. I tried adding a 1 mm thick tpu gasket but then the lid and box were too thick for the rails. I siliconed this gasket to the inner part of the battery box lid and I think it will help but have no intention of opening it back up and checking anytime soon. It can't hurt. Printed in TPU.