Whijeva' Battery Holder for Rev, goBilda, Modern Robotics 12v FTC Batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A battery mount for all competition-legal FTC battery formats / retention systems. Whijeva' battery, Whijeva' retention!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 193
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I think uploading a “make” or making a comment can be considered community outreach for FTC. I'd love to see what you are all doing with these! Please click ‘Like’ (the heart) here on Printables.com if you like it!
Here is a compact battery holder that fits any of the three battery shapes legal for FTC robotics competitions, and that supports both screw-down and Velcro retention. Whijeva' battery, whijeva' retention!
This takes very little space beyond most single-battery holders, so should be worth it for any teams with different battery types in use for their program. Mounting holes allow for centering on 8mm grids with both odd and even hole-count plates, in both directions.
FYI, the mounting plate you see it mounted on in the photo is here (and works surprisingly well): https://www.printables.com/model/1417690
COMPETITION LEGALITY AND FAIRNESS:
For fairness, my teams are not allowed to use any of my designs unless they find them here like any other team could (which for the record, hasn't happened yet). However, use of found part models like this is legal and encouraged for FTC, as choosing, printing and fitting others' parts into one's designs is a good level-appropriate skill to develop for FTC competitors.
SUPPORTING YOUR FAVORITE DESIGNERS:
The Amazon links below are affiliate links, and it costs you nothing to use them. If you use an affiliate link to get to Amazon the next time you need to buy something, the designer associated with that link will get a small percentage of any sale made during that browsing session.
If this isn't your favorite model, go use a link from someone else's model. But please use someone's affiliate link. There are a lot of designers out there, and this costs you nothing while helping to keep the community making.
BOM:
- Filament: https://amzn.to/3IxkXlb
(Note: The color in the photo is Elegoo standard PLA. It's a fine filament that prints well. But the various PLA+ formulations are often available at the same or lower price and are slightly better. So I've updated the main link here.)
INSTRUCTIONS:
- Print as a structural part. Meaning, ideally 3 walls and a minimum of 0.8 top and bottom thickness (usually 4 layers). And, 20% cubic (or other stress balancing) infill.
- ‘Likes’, ‘Follows’ and ‘Downloads’ all help to elevate goods designs, like any other social media. If you like a thing, please click ‘like’.