1 / 4
Trick or Treat Pillowcase Handles (Fabric Grab Handles)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add these to a pillowcase for your trick or treats :-)
- Ocena
- 0 / 5
- Polubienia
- 101
- Pobrania
- 170
- Wydruki
- 1
- Wyświetlenia
- 2729
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (91)Powiązane
- .2 layer height
- 4 perimeters
- 3 top and bottom layers
- 15% Grid infill
Two parts to make one handle. You will need to print each file twice to make two handles. Very strong! Made to grab and secure fabric to make a handle. Specifically pillow case's for trick or treating. They work really well. I printed in PETG but PLA may work as well.
Place fabric over Peg side.

Sandwich other side onto pegs and slide to lock together.
