Case feeder/collator - update
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New model with modified case plates, anchor and knob.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 485
- Wydruki
- 1
- Wyświetlenia
- 2378
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a complex mechanical device.
gcodes not included, as modifications of the model are assumed and encouraged. rsdoc file contains the entire model in DesignSpark Mechanical format, the DS Mechanical SW is for free and I recommend to use it to familiarize yourself with the collator assembly.
Notes and other major components sample references:
- Motor mount designed for JGA25-370 Geared motor DC motor 12V 5rpm ( https://www.aliexpress.com/item/32987942205.html )
- Case drop adapter is designed for:
- Proximity sensor LJ12A3-4-Z/BY, optional. ( https://www.aliexpress.com/item/32859197984.html ). Model assumes thread cutting instead of printing for better accuracy. Sensor purpose is case counting. Cut the thread by 12mm tap, note the pitch (fine pitch 1,5mm).
- Mr.Bulletfeeder output spring Large for pistol calibers ( https://www.doublealpha.biz/mrbulletfeeder-output-spring-and-extension-adaptor ).
Attention: Case bucket dimension is too small for rifle cases!
Tribute to https://github.com/dyspreficks/ShoeboxCaseFeeder.
Print instructions
There are no specific material recommendations, use PLA and/or PETG.
Layer 0,2mm is OK.