Plague doctor mask mesh goggles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of plague doctor mask goggles to print with mesh
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 171
- Wydruki
- 1
- Wyświetlenia
- 785
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added a 0.2mm layer covering the eye. This is done entirely in Orca slicer.
Set top and bottom layers to 0 for the mesh part only, and play with grid infill percentage for desired effect. Reduce sparse infill line width to 0.4mm on a 0.4mm nozzle.
I found that 50% infill gives a nice tradeoff between obscuring the eye while not reducing vision too much.
And I also added my .3mf file of the mask itself, on which I painted support blockers such that only the forehead is supported. I recommend using regular tree style support instead of “strong”, as this did not print well. But it was fast and it did work for me.