Next Gen Power Cable Winder (Print-in-Place, Multiple Sizes, Stackable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An entirely new approach to cable winding, adapted for Power cables.
- Ocena
- 5 / 5
- Polubienia
- 191
- Pobrania
- 681
- Wydruki
- 6
- Wyświetlenia
- 4779
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The concept of my Next Gen USB Cable Winder is scalable even to larger sizes.
Thus, here is a Ø100 mm Version with a 35×15 mm² opening sufficient for standard Euro power plugs. As with the USB version, the cable can be easily pulled to the outside.
Print in Place with standard slicer setup (2 perimeters, 15% infill). It is tempting to print with more perimeters, but experience shows then prints to fail. Reduced print temperature (-10°C) might be helpful. Organic support for cable cutout is recommended.
See the original design for other hints.
PLA+ and PLA are recommended materials. Just contact me for other sizes.