Magnetic Levitation UFO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project is simple and involves using a few magnets and two 3D-printed components.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1077
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This project is simple and involves using a few magnets and two 3D-printed components: one is the UFO, and the other is the support base. Once everything is printed, you'll need to use some fishing line to assemble the parts. Insert the magnets as shown in the diagram, and attach the fishing line—one end tied to the bottom of the base and the other to the bottom of the UFO. Then, insert the small magnet. Adjust the distances accordingly to make sure the UFO remains suspended.
Keep in mind that magnets have polarity: they attract each other when aligned correctly and repel when positioned oppositely.
Below you will find the two files for 3D printing