Cubby Tray Drawer, fits Honda Ridgeline
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray for inserting into dash cubby in G2 Honda Ridgeline
- Ocena
- 4,909 / 5
- Polubienia
- 97
- Pobrania
- 1204
- Wydruki
- 13
- Wyświetlenia
- 5380
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Honda Ridgeline (and Pilot) has a recessed cubby in the center of the dashboard that has limited use. This insert tray/drawer slides snugly into the cubby - flush with the dash - providing secure and out-of-sight storage for valuables and other small items. Choose from two models, one with no divider and another with a coin holder and adjacent second compartment.
6/21/25: Added STEP files for two of the designs. Also included a 12.7x6.35x6mm block to fasten to the top center (with glue or double-sided foam tape) of the cubby hole that stops the tray from accidentally pulling completely out. After installing the stop block, insert/remove the tray by lifting up on the front of the tray such that the back of the tray slides under the stop. If using the tray with the coin dividers, you may place the stop block a few mm right of center to avoid interference with the coins when extending the tray out.
Confirmed fit in 2020 Honda Ridgeline, as well as other G2 model years. May fit the Honda Pilot also.
Printed on Bambu X1C. 0.4mm nozzle, PETG-HF filament. Painted-on support required only at the rear bottom, between the print bed and the triangular void.