Flexture Cat6 Cable Comb with Screw Hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cable comb that can be both mounted to wire deck shelving and a wall or other flat surface.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 185
- Wydruki
- 1
- Wyświetlenia
- 924
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- GNU General Public License v2.0
Original design by Greys which can be found HERE.
General Info
This is a cable comb/mount that can be used on wire shelving, server racks, walls, and more.
The mounts can be used with either small zip ties or screws. If using zip ties or another mounting method, the screw hole can be easily snipped off with some flush cuts.
Printing
The model is designed to print with the tab facing up, in its default position This design requires that you have good layer adhesion due to the orientation. I use a Bambu X1C and printed in PLA and the tabs don't break off even if I try. Hence the requirement for flush cuts.