1 / 7
BETAFPV M03 5.8G VTX Whoop Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting adapter for the BETAFPV M03 5.8G VTX. For whoop 25.5mm mounting.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
For the BETAFPV M03 5.8G VTX.
Link to the VTX Webpage.
25.5mm mounting allows mounting of the VTX above the AIO board.
Print with PETG, ABS, ASA, or any other heat-tolerant materials. Not PLA.
I'm using it on the Armattan Tadpole frame with the whoop AIO board adapter.
If you have gummies you can print the variant without standoffs.
I also included one with integrated standoffs. Print this one with supports ONLY on the bottom face.
VTX slides into the mount and is retained by the little tab on the board. The fit is friction-tight.