North Pi for alternate Pi Orientation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the North Pi case from Fractal Design, but need access to the ethernet port without a cable sticking straight up.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I love Fractal Design's North Pi case but need access to the ethernet port without a cable sticking straight up into the air, so I came up with this modified body for it that would allow for the pi to sit with its ethernet port facing the rear. I don't need the bottom-hatch, so I omitted it from this version.
Main-body needs supports to succeed. I recommend organic supports from the build plate only.
If you print the horizontal version, you will need to add a negative volume modifier to the Front piece to block the feet from being printed on it. The file included in my parts already has it in place.
You will need a right-angle USB cord to power the pi, as there isn't much clearance for it in the case in this orientation. The HDMI port isn't easily accessible with this case. That isn't a problem for me, as I only access it through a web interface, but if you need HDMI output, this may not be the right version for you.
North Pi 3D Files — Fractal Design
Use all the original front and feet parts from Fractal Design's model. You don't need the top IO or bottom hatch parts, otherwise the build is identical to the original.