Stern Pinball - Speaker Lighting System Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of the insert that Stern provides with their Speaker Lighting System
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This model has the same dimensions and hardware holes as the insert that is included with Stern’s Speaker Lighting System for Pro/Premium and for the LE. It’ll work as long as you have the 5 1/4” speaker plates.
I've also created a version that includes an inner diffuser ring to soften the side views and downward playfield glass reflections.
You could use this model as a template to design your own custom inserts. If you are looking for some inspiration, here is a one that created for Jaws:
https://www.printables.com/model/1040267-jaws-pinball-speaker-lighting-shark-insert
I'd recommend printing inserts in white with the following settings:
- 0.20mm
- Infill 100%/Rectilinear
- 1 perimeter
(Note: The photos are of the original Acrylic part, not a 3D printed version)