Chip Clip 9000 extended by 10-100mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiple versions extended by 10mm in 10mm steps up to 100mm. Slight bend for pre tensioning and extra notch.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 193
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
An extended version of the Chip Clip 9000.
Multiple versions extended by 10mm in 10mm steps up to 100mm.
Since the clamping strength gets lower when extended a slight bend for pre tensioning was added.
Another improvement is a notch at the tip (and counter ridge) to prevent side motion (if not fully closed). This improvement maybe could be further improved (not 100% happy with this yet).
The included Fusion 360 file has a custom variable that could easily changed if a super special version is needed that is not included in the 10-100mm extended versions…