1 / 8
Radiomaster Pocket Hawkeye 3.5inch Monitor Mount — zdjęcie 1
1 / 8

Radiomaster Pocket Hawkeye 3.5inch Monitor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

With Parametric Fusion 360 files. So stem could be easily modified to be taller or shorterNo supports. Only brim…

Ocena
0 / 5
Polubienia
22
Pobrania
134
Wydruki
1
Wyświetlenia
896
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

With Parametric Fusion 360 files. So stem could be easily modified to be taller or shorter

  • No supports. Only brim needed for tall part
  • Easy to disassemble
  • Held by friction
  • Stem must be printed in shown upsidedown orientation for it to be durable

Requires 1pcs M3x12 screw for a monitor (shorter screw might be ok too) Same mount for Radiomaster TX16S: www.thingiverse.com/thing:6803000

Print Settings

Printer Brand:

Bambulabs

Printer:

Bambu P1S

**Rafts:**

No

Supports:

No

**Resolution:**

Any

Infill:

100% Walls

**Filament:** Any PLA/PETG

Notes:

.

Category: R/C Vehicles

Tagi